Jump to content

Canon de 340 modèle 1912 à berceau

From Alfawiki
Adapted from the English Wikipedia article Canon de 340 modèle 1912 à berceau, available under CC BY-SA 4.0Updated 10 August 2025
Canon de 340 modèle 1912 à berceau
Company typeMilitary artillery
IndustryDefense
Founded1916
Headquarters
France
ProductsRailway gun

The Canon de 340 modèle 1912 à berceau was a French railway gun utilized by both the French Army and the United States Army during World War I, and later redeployed by France throughout World War II.

History

Prior to the outbreak of World War I, many military forces did not possess an adequate quantity of heavy artillery and underestimated its growing importance as trench warfare prolonged the conflict along the Western Front. Since aircraft were incapable of carrying large bombs at that time, artillery became the primary source of heavy firepower. Consequently, surplus naval and coastal defense guns were ideal candidates for adaptation to field artillery roles.

The challenge for artillery engineers was significant: although large-caliber naval guns existed, their considerable weight and complexity hindered their use on land. Heavy field artillery pieces needed to be broken down into loads light enough for horse teams or early motorized traction engines to transport, complicating both mobility and deployment. While new designs attempted to address transport difficulties, converting existing heavy weapons remained problematic. The adoption of railway transport offered a practical solution by overcoming limitations related to weight, movement, and setup times, allowing rapid positioning of large-caliber guns on the battlefield.

Design

The Canon de 340 modèle 1912 à berceau was derived from six surplus 340mm/45 Modèle 1912 naval guns originally intended for the Bretagne class super-dreadnoughts. These guns became available following the cancellation of the Normandie class. Constructed with a rifled steel liner reinforced by multiple hoops, they incorporated an interrupted screw breech mechanism common for the period.

The gun mounts featured a substantial rectangular steel base supported by two six-axle railroad bogies manufactured by St. Chamond. The number of axles complied with European rail regulations limiting axle loads to 17 tonnes each. These weapons represented the longest-range artillery accessible to French and American forces during World War I. Despite their effectiveness, emplacement required extensive labor—between two and five days—due to necessary site preparation such as excavating a timber-lined pit beneath the breech to absorb recoil forces at elevations up to +37°. Additionally, rail tracks had to be reinforced to ensure stable gun positioning.

After emplacement, the carriage rested on five screw jacks that allowed removal of the bogies. The gun itself lacked any traverse capability and had to be aimed before installation. Barrels were mounted on a rear-trunnioned cradle designed to maximize elevation angles, counterbalanced by a substantial breech counterweight. The berceau (cradle recoil) system utilized five hydro-pneumatic cylinders arranged around the barrel for recoil absorption. Loading operations involved lowering the barrel and employing a derrick located at the rear of the carriage to lift shells from adjacent ammunition wagons.

World War I

The initial four guns were commissioned in 1916, with an additional two entering service in 1918. Two of these artillery pieces were assigned to American forces, while one was deployed on the Italian Front in 1917 in support of Italian troops. All six guns survived the conflict intact and were subsequently moved into reserve status.

World War II

All six of these artillery pieces were actively deployed by the French Army throughout World War II. Two units were assigned to the 2nd battery of Heavy Artillery Regiment 372° within the ALVF, stationed near Metzange. Another pair was allocated to the 7th battery close to Le Pont-de-Claix, while the final two served with the 8th battery near Lutterbach. Each survived the Fall of France intact. Subsequently, three were relocated to Italy, where they were reclassified as Cannoni da 340/45 Mod. 1912 ALVF and assessed for the protection of the naval base at Taranto. However, their operational use remained limited due to a shortage of ammunition. The remaining three guns were utilized by German forces under the designation 34 cm Kanone (Eisenbahn) in Wiegenlafette 674(f) within a Kriegsmarine coastal defense installation at Plouharnel, near Lorient.

Ammunition

These artillery pieces operated with separate loading bagged propellant charges and projectiles, with each propellant charge having an approximate weight of .

Type Mass
HE15A 465 kg (1,025 lb)
HE17 FATO 445 kg (981 lb)
HE32-6 FATO 432 kg (952 lb)

References