Jump to content

QF 4.7-inch Mk I–IV naval gun

From Alfawiki
Adapted from the English Wikipedia article QF 4.7-inch Mk I–IV naval gun, available under CC BY-SA 4.0Updated 29 November 202521 sources
Elswick Ordnance Company
IndustryArmaments, artillery manufacturing
Founded19th century
ParentArmstrong Whitworth

Template:Infobox weapon

The QF 4.7-inch gun Marks I through IV were a series of British quick-firing naval and coastal artillery pieces developed in the late 19th century. These guns, measuring 4.724 inches (120.0 mm) in caliber with barrels 40 calibres long, were deployed by multiple navies worldwide. Additionally, they were adapted onto various wheeled carriages to serve as extended-range field artillery for the British Army.

Designed as a successor to the earlier BL 5-inch gun Mk I – V, this weapon was engineered to take advantage of newer smokeless propellants like cordite. It offered a significantly faster firing rate compared to its predecessor while firing projectiles only marginally lighter in weight.

Design and development

These artillery pieces were created and produced by the Elswick Ordnance Company, a division of Armstrong Whitworth. Their design capitalized on the then-new "QF" technology, which utilized a propellant charge encased in a brass cartridge with an integrated primer at its base. This innovation enabled a quicker firing sequence compared to the older "Breech Loading" method, where charges were loaded in cloth bags and a separate friction or percussion tube was inserted into the breech to initiate firing. The brass cartridge effectively sealed the breech, allowing for a lighter firing mechanism and eliminating the need to clean or sponge out any residual embers from previous shots, which could prematurely ignite the black powder charge. The QF system had already demonstrated success with smaller calibers such as the QF 3 pounder Hotchkiss and Nordenfelt QF 3 and 6-pounder guns starting in 1885.

The initial QF gun in this category, known as Pattern "M" by Elswick, was presented to the Admiralty in 1886.[1] Originally intended to fire a 36-pound (16 kg) shell, extensive testing led to an increase in projectile weight to 45 pounds (20 kg).[2] However, it was Italy, not the United Kingdom, that adopted this gun as the M1889 model (see below).[1]

These guns quickly became significant export products and were standardized at a calibre of 4.724 inches (120mm) to accommodate metric naval forces; the British designation of 4.7 inch is a rounded figure. Elswick classified the guns from Mark I through Mark III as Patterns P, Q, and T respectively. While they shared the tube and hoop construction type, each Mark featured unique design details. The Mark IV introduced a wire-wound component into its build. Initially, all versions employed a three-motion screw breech, with some later modified into "A" subtypes by altering this mechanism or converted to single-motion breeches ("B" type). Army variants adapted to use bagged charges paired with a 3-inch steel breech-sealing case—rather than the typical brass—were redesignated as Mark VI.[1]

Royal Navy service

During this era, British pre-dreadnought battleships and cruiser vessels were equipped with these guns. Production numbers reached 154 units of Mark I, 91 of Mark II, 338 of Mark III, and 584 of Mark IV models. In total, the Royal Navy directly acquired 776 guns, supplemented by an additional 110 transferred from Army stocks.

The minelayer Error: {{sclass}} missing required parameter: ship type (help) relinquished its armament in order to supply high-angle anti-aircraft weaponry for London's air defense.[1]

By the time of the First World War, these guns had become outdated for frontline naval combat but found renewed purpose when mounted on merchant vessels and troop transports to provide protection against hostile submarines and raiders targeting commercial shipping.

Service in the British Army

A small quantity of these guns were adapted for fixed coast artillery roles within land forces. Furthermore, beginning in the early 1900s, certain Mark IV models were installed on modified 40-Pr Rifled Breech Loading Gun carriages to equip batteries of the Royal Garrison Artillery (Volunteers). Notably, the 1st Ayrshire and Galloway Royal Garrison Artillery (Volunteers) acquired several of these weapons in 1903 to arm their three heavy batteries. These artillery units were semi-mobile, outfitted with limbers capable of being towed by either horses or gun tractors. They remained operational with Territorial Force artillery formations, with some continuing in service during the First World War.

Second Boer War (1899–1902)

Gun mounted on a "Percy Scott" carriage during the Battle of Colenso

At the outset of the Second Boer War, British troops found themselves outmatched by the Boers’ long-range artillery pieces. Captain Percy Scott of HMS Terrible initially devised wooden static siege mountings for two 4.7-inch (120 mm) guns sourced from Cape Town’s coastal defenses to combat the Boers’ formidable "Long Tom" guns during the Siege of Ladysmith in 1899–1900. Subsequently, Captain Scott created a mobile carriage for these 4.7-inch guns, which had been removed from their standard static coastal or naval mounts, thus providing the army with a heavy field artillery option. These makeshift carriages lacked recoil mechanisms; therefore, during firing, drag shoes and securing cables anchored to a strong point ahead of the gun were essential for recoil control. Operated by Royal Navy personnel, these guns required up to 32 oxen to be transported.

South-West Africa Campaign (1914–1915)

In desert terrain during the South West Africa campaign, WWI. Oxen visible.

The identical guns mounted on "Percy Scott" carriages were deployed by South African forces against German troops throughout the South-West Africa campaign during the First World War. These artillery pieces were disembarked at Lüderitz Bay in October 1914 and later at Walvis Bay in February 1915 before being transported inland across desert regions to support advancing South African units.

Western Front (1914–1917)

A gun on a Mk I "Woolwich" carriage operating in Sausage Valley, Somme 1916
Template:Center

As many as 92 QF 4.7-inch guns equipped with updated Mk I "Woolwich" carriages—introduced in June 1900 and featuring partially effective (12-inch) recoil buffers—and on heavier modified carriages derived from old RML 40 pounder guns were deployed to France with Royal Garrison Artillery units, predominantly drawn from the Territorial Force, between 1914 and 1917.

These artillery pieces played significant roles in early engagements such as the Battle of Neuve Chapelle in March 1915, where 32 of them, alongside just 12 60-pounder guns, were assigned to counter-battery operations. According to General Farndale, counter-battery efforts at Neuve Chapelle failed to neutralize German artillery largely due to the then-nascent state of long-range map-based targeting and challenges in maintaining forward observation posts across flat terrain.

By the time of the Battle of Aubers Ridge on 9 May 1915, barrels on the 28 guns belonging to the 3rd and 8th Heavy Brigades as well as the 1st West Riding and 1st Highland Heavy Batteries had become so worn that driving bands were stripped from shells at the muzzle, severely compromising accuracy. Additionally, two guns mounted on the armoured train "Churchill" saw action at Aubers Ridge alongside thirty-three available 60-pounders. Counter-battery fire again proved ineffective due to both barrel wear and insufficient means for precise enemy gun detection; air reconnaissance and radio communication techniques were only beginning to be employed.

The gradual loss of precision caused by barrel wear combined with their relatively light shell weight reduced their effectiveness amid trench warfare conditions. Consequently, they were gradually replaced by more modern 60-pounder guns as these became accessible. At the Battle of the Somme during June–July 1916, forces deployed 32 of these 4.7-inch guns alongside 128 60-pounders. However, withdrawal from frontline service was not completed until April 1917. Those removed from Western Front duties were reassigned to other theaters such as Italy and Serbia.

Gallipoli Campaign (1915)

Transporting the gun to its emplacement at Anzac, July 1915
Gun positioned at Anzac, Gallipoli

During the Gallipoli campaign, the 1st Heavy Artillery Battery—a combined force of Australian troops and Royal Marines—deployed a 4.7-inch gun to suppress distant Turkish artillery fire originating from the area known as the "Olive Grove" (actually "Palamut Luk" or Oak Grove)[3], located between Gaba Tepe and Maidos. Lt-Colonel Rosenthal, commander of the 3rd Australian Field Artillery Brigade, recalled: "I persistently requested two 4.7-inch guns for the right flank to engage numerous targets beyond the reach of 18-pounders, but it was not until 11 July that a single, very old and heavily worn gun was delivered and set up on the right flank, firing its inaugural round on 26 July."[4] This particular gun was abandoned and damaged during the evacuation from Gallipoli but was subsequently recovered and preserved as a museum artifact.[5] The damaged barrel is currently exhibited at the Australian War Memorial.

Salonika Front

From January 1916 onwards, several 4.7-inch (120 mm) guns mounted on "Percy Scott" carriages were utilized by British and Serbian forces during the Salonika (Macedonian) campaign.

Italian Deployment

Within Italian service, QF 4.7-inch guns were designated 120/40 A 1889 and 120/40 A 1891. Licensed production by Ansaldo yielded models closely resembling the British Mk I*. These weapons equipped various vessels of the Regia Marina, including auxiliary cruisers, dreadnought battleships, ironclads, predreadnought battleships, protected cruisers, and torpedo cruisers. They saw operational use in conflicts such as the Italo-Turkish War, World War I, Second Italo-Ethiopian War, and World War II.

First Sino-Japanese War

The Japanese belted cruiser Chiyoda, launched in 1890, was armed with ten QF 4.7-inch guns in single mounts—one each at bow and stern, and four per side mounted in sponsons—marking one of the earliest naval adoptions of this artillery piece. Following Chiyoda, the Imperial Japanese Navy rapidly incorporated quick-firing guns into their cruiser fleets. At the Battle of Yalu River in 1894, six Japanese cruisers collectively carried sixty QF 4.7-inch guns. Alongside eight QF 6-inch guns, this superior quick-firing armament provided a decisive tactical edge over the Chinese Beiyang Fleet, contributing significantly to Japan's victory.

Licensed Manufacture

The Japanese Type 41 4.7-inch/40 (12 cm) naval gun represented a licensed version of the Elswick Mark IV design. Initially procured directly from Elswick in England, production later shifted to domestic manufacture under the designation "Mark IVJ". On December 25, 1908—the 41st year of Emperor Meiji's reign—it was officially redesignated as Type 41. Subsequently, on October 5, 1917, it underwent metric standardization within the Imperial Japanese Navy, becoming classified as a "12 cm" gun despite retaining its original bore diameter of 4.724 inches.

During World War I, Japan supplied Britain with twenty-four original Elswick-built guns and thirteen Mark IVJ units as part of their support to the Allied powers under the Anglo-Japanese Alliance.[6] By 1940, some of these guns had been installed in British coastal defense positions during World War II preparations against invasion; for example, at Mersea Island in Essex.[7]

This artillery piece served extensively as either secondary or tertiary armament on most Japanese cruisers constructed between 1900 and 1920 and was also the main armament on certain destroyers such as those of the Umikaze class class. Some remained operational well into the period of the Pacific War.

United States service

Template:Center

In 1898, the United States Army procured 35 British QF 4.7-inch guns, which were classified as "4.72-inch Armstrong guns." Among these, eighteen were 40 caliber Mark IV models, thirteen were 45 caliber, and four were 50 caliber variants; the 45 and 50 caliber versions appear to have been non-standard export types.[8] [9] Alongside these, nine 6-inch Armstrong guns were also acquired simultaneously. The primary intent was to rapidly equip coastal defense installations with modern quick-firing medium-caliber artillery in response to the outbreak of the Spanish–American War, amid concerns about potential bombardment of US eastern seaboard ports by the Spanish navy. At that time, the extensive Endicott program for coastal defenses was far from completion, and most existing fortifications still relied on muzzle-loading artillery from the 1870s. By late 1899, thirty-four of these 4.7-inch guns had been deployed across seventeen forts along both the East and Gulf Coasts;[10] with one remaining 40 caliber gun retained at the Sandy Hook Proving Ground near Fort Hancock, New Jersey for experimental purposes.[8][11][12][13]

According to US ordnance manuals, ammunition types for these guns included a standard cast iron practice shell, a common steel explosive shell, a reinforced-headed steel explosive shell, and a shrapnel shell equipped with a time/percussion fuze, each weighing approximately 45 pounds (20 kg).[14] When mounted for firing at a 15-degree elevation, their maximum ranges varied: 8,312 yards (7,600 m) for the 40 caliber gun,[14] 9,600 yards (8,800 m) for the 45 caliber,[15] and 9,843 yards (9,000 m) for the 50 caliber model.[16] The propellant charge for the 40 caliber gun consisted of 7.5 pounds of nitrocellulose powder; in contrast, the larger cases used by the 45 and 50 caliber guns contained 10.5 pounds.[14][15][16]

The United States Navy acquired two protected cruisers in 1898 that were armed with four British-made export-model 4.7-inch 50 caliber guns each, supplemented by a main battery of 6-inch guns. These vessels were originally under construction at Elswick for Brazil but were purchased by the US to prevent their acquisition by Spain; they were subsequently classified as the New Orleans class. One source identifies their armament as Elswick Pattern DD for the 6-inch guns and Pattern AA for the 4.7-inch guns.[17] These weapons were unique within US Navy service and designated as "4.7"/50 caliber Mark 3 Armstrong guns".[18] During refits conducted at the Cavite Navy Yard in the Philippines in 1903, both cruisers had their 4.7-inch artillery replaced with standard USN 5-inch guns; later in 1907, their 6-inch weapons were also substituted.[19] Some of these replaced guns were installed between 1907 and 1910 in fortifications around Grande Island and Subic Bay, manned by the United States Marine Corps' Advanced Base Force until more modern defenses centered on Fort Wint were completed by the United States Army Coast Artillery Corps.[18][20] Today, one gun from each of USS New Orleans (CL-22) and USS Albany (CL-23) is preserved in Geneva, Illinois.[21]

Between 1913 and 1914, eight of the 4.7-inch 45 caliber guns—including two spares—were relocated to Fort Ruger and Fort Kamehameha in Hawaii.[11][12][13] By this period, most installations under the Endicott and Taft coastal fortification initiatives had been completed, with many of these medium-caliber weapons being replaced by more powerful 6-inch guns. The four remaining 4.7-inch 50 caliber guns at Fort Monroe were placed into reserve status by 1914; one was sent to Sandy Hook for testing purposes while the others were stored at the Augusta Arsenal in Georgia.[8]

Following American involvement in World War I beginning in 1917, further redeployments occurred involving these weapons. Eight Mark IV 40 caliber guns from less vulnerable forts were loaned to the Army Transport Service, where they possibly armed troop transports and cargo vessels during hostilities; these were returned after the war in 1919 and quickly disposed of.[8] Additionally, two Mark IV weapons from Fort Strong in Boston Harbor were transferred to Sachuest Point in Middletown, Rhode Island. The three stored 50 caliber guns at Augusta were deployed to Fort Brooke (then known as Castillo San Felipe del Morro) in San Juan, Puerto Rico.[8][11][12] After World War I concluded, all remaining 4.7-inch artillery pieces were withdrawn from active service by late 1920 and fully disposed of by 1927. Other limited-use weapons followed suit during this timeframe. Twenty-four units were distributed as war memorials across various towns or retained within Hawaii; only six remain today. The majority of those not preserved were likely scrapped during World War II material drives.[8]

Ammunition

The ammunition utilized was of the fixed QF variety, with each complete cartridge weighing approximately 20.4 kg (45 lb).

This artillery piece was capable of discharging a variety of shell types, including:

Surviving examples

Japanese-produced 4.7"/40 Mark IV exhibited at Manege Military Museum, Finland
One of two remaining QF 4.7-inch B Mark IV* guns located at Fort Péninsule, Forillon National Park, Quebec
  • Outdoor display of a preserved 4.7"/40 (12 cm) Mark IV*/VI on a field carriage at Artillery Park in Valladolid, Spain
  • The ruptured barrel from Gallipoli is exhibited at the Australian War Memorial in Canberra
  • A naval gun showcased at the Museo Tecnico Navala Della Spezia in Italy
  • Japanese-manufactured 4.7"/40 Mark IV housed in the Military Museum of Finland located in Suomenlinna, Finland
  • A 4.7-inch QF Gun, No. 563, Mark IV, produced in 1894 by the Royal Gun Factory on a Percy Scott carriage, preserved within the courtyard of the Indian Museum in Kolkata (Calcutta)
  • Two QF 4.7-inch B Mk IV* guns mounted on central pivots at Fort Amherst, St. John's, Newfoundland
  • Two QF 4.7-inch B Mk IV* guns on central pivot mounts situated on Bell Island, Newfoundland
  • Two QF 4.7-inch B Mk IV* guns installed on central pivot mounts at Fort Peninsula, Quebec
  • A single QF 4.7-inch B Mk IV* gun mounted on a central pivot at Fort Prevel, Quebec (mounted upside down with shield reversed)
  • A QF 4.7-inch Mk IV Armstrong No. 12123 on central pivot mount Mk 1 No. 10981 (previously positioned at Battery Talbot, Fort Adams, Rhode Island), now located in Equality Park, Newport, RI
  • A QF 4.7-inch Mk IV Armstrong No. 12124 on central pivot mount Mk 1 No. 10982 (formerly at Battery Talbot, Fort Adams, Rhode Island), currently at Battery Bingham, Fort Moultrie, Sullivan's Island, South Carolina (missing shield)
  • A QF 4.7-inch Mk IV Armstrong No. 11856 on central pivot mount Mk 1 No. 10842 (previously stationed at Battery Drum, Fort Strong, Massachusetts), now situated at State Armory, Main Street, Ansonia, Connecticut
  • A QF 4.7-inch Mk IV Armstrong No. 9718 on central pivot mount Mk 1 No. 10841 (formerly emplaced at Battery Van Swearingen, Fort Pickens, Florida), currently placed at County Courthouse, Danielsville, Georgia
  • A QF 4.7-inch Armstrong 45 calibre No. 11933 (once located at Battery Dodge, Fort Ruger, Hawaii), now positioned upside down atop its shield at State Armory, Wahiawa, Oahu, Hawaii
  • A QF 4.7-inch Armstrong 45 calibre No. 11009 (also formerly at Battery Dodge, Fort Ruger), displayed upside down resting on its shield top at State Armory, Wahiawa, Oahu, Hawaii
  • A QF 4.7-inch/50 calibre Mark 3 Armstrong (US Navy designation) taken from USS New Orleans (CL-22), exhibited in Kane County, Illinois as part of the Soldier and Sailor Monument at the former courthouse in Geneva, Illinois
  • A QF 4.7-inch/50 calibre Mark 3 Armstrong (US Navy designation) removed from USS Albany (CL-23), also located in Kane County, Illinois within the Soldier and Sailor Monument at the former courthouse in Geneva, Illinois

See also

Comparable weapons by role, capability, and period

Notes

References

  1. ↑ 1.0 1.1 1.2 1.3 "British 4.7"/40 (12 cm) Elswick 4.7"/40 (12 cm) QF Marks I, II, III, IV and VI". Archived from the original on 11 January 2008. Retrieved 27 January 2008.
  2. ↑ The Engineer. Morgan-Grampian (Publishers). 1891.
  3. ↑ Mallett 1999.
  4. ↑ Rosenthal 1920.
  5. ↑ Mallett 2005.
  6. ↑ DiGiulian, Tony. "4"/40 (12 cm) 41st Year Type". NavWeaps.com. Archived from the original on 11 January 2008. Retrieved 27 January 2008.
  7. ↑ http://unlockingessex.essexcc.gov.uk/custom_pages/monument_detail.asp?kids=1&monument_id=31487Template:Fix/category[permanent dead link]
  8. ↑ 8.0 8.1 8.2 8.3 8.4 8.5 Cite error: Invalid <ref> tag; no text was provided for refs named guncards1
  9. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named Citeweb1
  10. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named CongressionalReport
  11. ↑ 11.0 11.1 11.2 Cite error: Invalid <ref> tag; no text was provided for refs named BerhowForts1
  12. ↑ 12.0 12.1 12.2 Cite error: Invalid <ref> tag; no text was provided for refs named CDSG1
  13. ↑ 13.0 13.1 Cite error: Invalid <ref> tag; no text was provided for refs named FWiki1
  14. ↑ 14.0 14.1 14.2 Cite error: Invalid <ref> tag; no text was provided for refs named 4740p11-14
  15. ↑ 15.0 15.1 Cite error: Invalid <ref> tag; no text was provided for refs named 4745p11-14
  16. ↑ 16.0 16.1 Cite error: Invalid <ref> tag; no text was provided for refs named 4750p11-14
  17. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named Conways1
  18. ↑ 18.0 18.1 Cite error: Invalid <ref> tag; no text was provided for refs named ReferenceA
  19. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named Friedman1984
  20. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named NavWeaps6inchMk5
  21. ↑ Cite error: Invalid <ref> tag; no text was provided for refs named waymark

Bibliography

External links

Template:VictorianEraBritishNavalWeapons Template:VictorianEraBritishWeapons Template:GreatWarBritishWeapons Template:GreatWarBritishNavalWeapons